Description:
A complete DJ booth in your bag!
DJ PLAYER is a mobile DJing solution with 2 decks, 2 effect engines and a mixer. Designed, developed and tested by professional DJs, every detail is carefully tuned and continuously improved to provide the best DJ application for You. DJ PLAYER's high usability and stability standards makes it a perfect tool even for real DJ booths in real clubs.
TIP: If you need two or more devices for your set, buy once and install this application on up to 5 devices at any time.
DJ PLAYER is a universal app with iPad and iPhone/iPod touch interfaces. It has 6 different output modes for different situations. 2 output modes are made for hardware mixer usage (the built-in mixer is off):
- Club Classic mode to use two devices with DJ PLAYER as two separate decks, connected to a hardware mixer. In this mode the two devices will sync the current BPM value over Bluetooth or WiFi.
- Double Deck mode to use one device with DJ PLAYER, connected to a hardware mixer. Headphone left is deck A, headphone right is deck B.
2 output modes for headphone cable adapters:
- Split Headphone for special Split Cable Adapter. Headphone left is master, headphone right is pre-listening.
- Split Headphone with Auto Stereo. Same as before, but full stereo when PFL buttons are off.
2 output modes with 2 independent stereo outputs:
- Home mode: headphone output is pre-listening, master output is transmitted to our NetOut app over the network.
- Club Master mode: headphone output is master, pre-listening is transmitted to NetOut. Our unique NetOut audio transmission is a special design for ultra-low latency DJ monitoring.
Mixer:
- Crossfader with 3 curves (beatmix, constant power, scratch) with morphing feature: attach additional low and highpass filters to each end of the crossfader.
- For each channel: fader with 2 curves (smooth, hard), gain, PFL switch, low/mid/high ±6 db adjust eq, low/mid/high mixing eq from cutoff to 0 db, hidden cutoff switch below each mixing eq.
- Calibrated VU meter per channel and stereo VU meter for master, balance control. iPad only: master volume, master VU meter before or after master fader.
- Pre-listening: master/PFL ratio, headphone volume. Split or stereo PFL (in Home or Club Master mode).
Deck:
- Play/pause, frame precise or waveform positioning.
- Vinyl Vision or waveform display, touch on it to search (jump).
- 4 gapless cue points and cue buttons with rec/hot cue modes, play like a sampler.
- 3 different cue button modes.
- Pitch control with four ranges (±4, ±8, ±16 and ±100%), fine adjust pitch step buttons with AutoStep, adjustable pitch bend strength.
- Reverse play (tap before or after the pitch fader head to change direction).
- BPM sync, automatic bpm and beatgrid detection.
Effects:
- BPM-based echo, reverb, lo-fi, flanger, highpass, lowpass, bandpass, notch and peak.
- Adjustable effect parameters with touch or accelerometer, adjustable frequency range.
- Sharp or smooth echo/reverb release, beatcounter.
Tracks:
- No importing necessary, reads tracks from your iPod library. Filter by iPod library playlist, mass analyzing of iPod library items.
- Alternative track import: WiFi upload via web browser, USB file upload in iTunes.
- Convenient track search with textual search/filter.
- Sort by artist, title or BPM (for iPod library items as well!), section views by first letter or BPM range.
- MP3, WAV, AAC, Apple Lossless, AIFF, all formats with the same features and low latency.
- Serato and Traktor metadata support (BPM and cue points).
DJ PLAYER is a mobile DJing solution with 2 decks, 2 effect engines and a mixer. Designed, developed and tested by professional DJs, every detail is carefully tuned and continuously improved to provide the best DJ application for You. DJ PLAYER's high usability and stability standards makes it a perfect tool even for real DJ booths in real clubs.
TIP: If you need two or more devices for your set, buy once and install this application on up to 5 devices at any time.
DJ PLAYER is a universal app with iPad and iPhone/iPod touch interfaces. It has 6 different output modes for different situations. 2 output modes are made for hardware mixer usage (the built-in mixer is off):
- Club Classic mode to use two devices with DJ PLAYER as two separate decks, connected to a hardware mixer. In this mode the two devices will sync the current BPM value over Bluetooth or WiFi.
- Double Deck mode to use one device with DJ PLAYER, connected to a hardware mixer. Headphone left is deck A, headphone right is deck B.
2 output modes for headphone cable adapters:
- Split Headphone for special Split Cable Adapter. Headphone left is master, headphone right is pre-listening.
- Split Headphone with Auto Stereo. Same as before, but full stereo when PFL buttons are off.
2 output modes with 2 independent stereo outputs:
- Home mode: headphone output is pre-listening, master output is transmitted to our NetOut app over the network.
- Club Master mode: headphone output is master, pre-listening is transmitted to NetOut. Our unique NetOut audio transmission is a special design for ultra-low latency DJ monitoring.
Mixer:
- Crossfader with 3 curves (beatmix, constant power, scratch) with morphing feature: attach additional low and highpass filters to each end of the crossfader.
- For each channel: fader with 2 curves (smooth, hard), gain, PFL switch, low/mid/high ±6 db adjust eq, low/mid/high mixing eq from cutoff to 0 db, hidden cutoff switch below each mixing eq.
- Calibrated VU meter per channel and stereo VU meter for master, balance control. iPad only: master volume, master VU meter before or after master fader.
- Pre-listening: master/PFL ratio, headphone volume. Split or stereo PFL (in Home or Club Master mode).
Deck:
- Play/pause, frame precise or waveform positioning.
- Vinyl Vision or waveform display, touch on it to search (jump).
- 4 gapless cue points and cue buttons with rec/hot cue modes, play like a sampler.
- 3 different cue button modes.
- Pitch control with four ranges (±4, ±8, ±16 and ±100%), fine adjust pitch step buttons with AutoStep, adjustable pitch bend strength.
- Reverse play (tap before or after the pitch fader head to change direction).
- BPM sync, automatic bpm and beatgrid detection.
Effects:
- BPM-based echo, reverb, lo-fi, flanger, highpass, lowpass, bandpass, notch and peak.
- Adjustable effect parameters with touch or accelerometer, adjustable frequency range.
- Sharp or smooth echo/reverb release, beatcounter.
Tracks:
- No importing necessary, reads tracks from your iPod library. Filter by iPod library playlist, mass analyzing of iPod library items.
- Alternative track import: WiFi upload via web browser, USB file upload in iTunes.
- Convenient track search with textual search/filter.
- Sort by artist, title or BPM (for iPod library items as well!), section views by first letter or BPM range.
- MP3, WAV, AAC, Apple Lossless, AIFF, all formats with the same features and low latency.
- Serato and Traktor metadata support (BPM and cue points).
